Autonomous deep-ocean robotics

Rebuilding deep-ocean extraction around low-cost robotics.

TRILLION KG is developing a robotic approach to polymetallic nodule collection, built around compact autonomous units, a modular operating concept and a focus on long-duration power reliability.

Development-stage project. Prototype progress and performance figures are preliminary; underwater testing has not yet been completed.

Concept architectureTR-KG / R&D
COLLECTION UNITPOWER SYSTEMMODULAR SUBSEA PLATFORM
65%Reported prototype progress
$500Preliminary target cost per robot
01 / Thesis

A different operating model for deep-ocean collection.

The project explores whether compact, lower-cost robotic units can offer an alternative to relying solely on large, centralized collection systems.

↗

The challenge

Deep-ocean operations involve demanding engineering, complex logistics and expensive support infrastructure. Reliability, power supply, deployment and recovery are central design challenges.

  • High operational complexity in remote environments
  • Long-duration equipment reliability requirements
  • Need to validate the full system before economic conclusions
⌁

Our development thesis

TRILLION KG is developing a compact collection robot and a modular concept intended to make the collection layer simpler and more scalable.

  • Focus on a low-cost collection unit
  • Component integration and uninterrupted power are key priorities
  • Performance and economics must be established through testing
02 / Technology

Designed around a modular collection cycle.

This is the current concept architecture. Operational details and system performance remain subject to engineering completion and testing.

STEP 01

Deploy

Position robotic collection units for a planned operating area.

STEP 02

Collect

Develop the collection mechanism for polymetallic nodules on the seabed.

STEP 03

Lift

Integrate the collection unit with a suitable retrieval and transfer approach.

STEP 04

Transfer

Move collected material into the next stage of the handling chain.

Engineering priority: power reliability

The team is coordinating the robot’s components, with particular attention to an uninterrupted power supply. Based on the team’s calculations, the target is to support more than six months of operation at depth. This has not yet been validated in underwater tests.

Planned test depth

A 600-metre validation depth is a planned development target, not a completed test result. The testing programme remains ahead of the project.

03 / Economics

Cost targets to validate—not proven unit economics.

These figures are preliminary estimates and targets, not verified production costs or demonstrated operating results.

$500Preliminary estimated cost per collection robot
1,000 t/yrIndicative target output per robot, subject to validation
$20/tPreliminary estimated collection cost, not yet demonstrated
$25–30MIndicative system-cost estimate for a 1-million-tonne/year scenario

All economic figures are preliminary project estimates. Scope, infrastructure, recovery rates, maintenance, energy use, environmental requirements and test results may materially change the outcome. No commercial performance is claimed.

04 / Validation

Prototype development is underway. Testing comes next.

The immediate objective is to complete component integration and prepare the prototype for a structured validation programme.

Development stage
65%

Reported progress of the nodule-collection robot prototype

A project-reported development estimate, not an independently audited readiness level.

All underwater tests remain ahead.

01

Component coordination

Current focus: aligning and integrating the robot’s subsystems.

02

Power-system verification

Assess the proposed long-duration power approach against engineering requirements.

03

Planned underwater tests

Test the prototype under defined conditions. No underwater test results are available yet.

04

Performance and cost evidence

Use measured results to update reliability, collection output and cost assumptions.

05 / Why Kyrgyzstan

Build and learn before scaling.

TRILLION KG is considering Kyrgyzstan as a base for cost-conscious engineering, assembly and early-stage development. The approach is to progress through staged validation before making broader commercial claims.

“A disciplined path from prototype to evidence, then to scale.”

  • Coordinate engineering and component integration
  • Plan practical test stages and measurable acceptance criteria
  • Use test data to inform next development decisions

Any specific test location, facility access or partnership should be described as confirmed only after formal arrangements are in place.

06 / Roadmap

Milestone-led development.

Timing depends on engineering progress, test readiness, funding and access to suitable validation facilities.

Phase 01 / Current

Complete integration

Coordinate robot subsystems, resolve engineering interfaces and advance the uninterrupted power-supply design.

Phase 02 / Planned

Prototype validation

Conduct planned tests, evaluate key functions and document measured results against agreed criteria.

Phase 03 / Planned

Refine the system

Use validation evidence to improve the design, update cost assumptions and define the next development stage.

07 / Business expansion

Start with collection. Expand only when validated.

The initial focus is the polymetallic nodule collection robot. Adjacent opportunities are longer-term possibilities, not current commercial offerings.

01 / BEACHHEAD

Nodule collection

Complete and validate the robot prototype and establish evidence for its operational concept.

02 / ADJACENT

Subsea services

Potential future applications in subsea inspection, monitoring or task-specific robotics, subject to technical fit.

03 / LONGER-TERM

Data and fleet systems

Explore fleet coordination and operational data tools if testing demonstrates that the robotic platform is viable.

Funding & partnerships

Help move the prototype toward validation.

The project is seeking $500,000 in pre-seed funding to support prototype completion, power-system validation and the first planned test programme. Milestones, budget allocation and test scope can be discussed with interested investors and technical partners.

Start a conversation ↗
08 / Contact

Let’s discuss the next stage.

For investor, engineering and strategic partnership enquiries, contact the project team.

TRILLION KG

Autonomous robotics for polymetallic nodule collection.

↗
Project contactAndré Lutz
⌂
Company details provided for the projectElireg GmbH
Bernstrasse 51, 4922 Bützberg, Switzerland

Confirm the legal relationship between TRILLION KG and Elireg GmbH, and approve these contact details, before public launch.

Send an enquiry

This form opens your default email application with the message prepared. It does not send data to a website server.

Your email app opens with the details entered. Nothing is submitted to this page’s hosting server.